Only DRAM, NAND suppliers use 300mm wafers

Article By : IC Insights

The reliance on existing wafer sizes is increasing as outlook for 450mm wafers fades, according to IC Insights.

Today, there are less than half the number of companies that own and operate 300mm wafer fabs than 200mm fabs, according to a new research bulletin from IC Insights. Moreover, the distribution of worldwide 300mm wafer capacity among those manufacturers is becoming increasingly top-heavy.

Prior to 2008, the 200mm wafer was used in more cases for manufacturing ICs than any other wafer size. However, since 2008, the majority of IC fabrication has taken place on 300mm wafers. Rankings of IC manufacturers by installed capacity for each of the wafer sizes are shown in Figure 1. The chart also compares in a relative manner the amounts of capacity held by the top 10 leaders.

[ICInsights wafersize installed 01 (cr)]
__Figure 1:__ *Installed capacity leaders by wafer size (Source: IC Insights)*

Looking at the ranking for 300mm wafers, it is not surprising that the list includes only DRAM and NAND flash memory suppliers like Samsung, Micron, SK Hynix and Toshiba/Western Digital; the world’s five largest pure-play foundries TSMC, GlobalFoundries, UMC, Powerchip, and SMIC; and Intel, the industry’s biggest IC manufacturer (in terms of revenue). These companies offer the types of ICs that benefit most from using the largest wafer size available to best amortise the manufacturing cost per die, and have the means to continue investing large sums of money in new and improved 300mm fab capacity.

The leaders in the 200mm size category consist of pure-play foundries and manufacturers of analog/mixed-signal ICs and microcontrollers.

The ranking for the smaller wafer sizes (i.e., ≤150mm) includes a more diversified group of companies. STMicroelectronics has a huge amount of 150mm wafer capacity at its fab site in Singapore, but the company has been busy converting this production to 200mm wafers. Another STMicroelectronics 150mm fab in Catania, Italy, is also undergoing a conversion to 200mm wafers, with plans for that project to be completed in 2017.

A significant trend regarding the industry’s IC manufacturing base, and a challenging one from the perspective of companies that supply equipment and materials to chip makers, is that as the industry moves IC fabrication onto larger wafers in bigger fabs, the group of IC manufacturers continues to shrink in number (Figure 2).

[ICInsights wafersize installed 02 (cr)]
__Figure 2:__ *Number of IC companies with 200mm vs. 300mm fabs (Source: IC Insights)*

Subscribe to Newsletter

Test Qr code text s ss